CNSL Mortar


product description

This is a two -part chemical setting CNSL mortar used for acid resisting brick lining, to protect most commonly used construction materials like RCC, MS, steel, brick masonry construction etc., from corrosive environment in modern chemical age. CNSL Mortar is resistant to acids, alkalis, and solvents, etc. at temperature up to 170 C.

Area of Application

CNSL is used for acid resistant brick/tile lining where maximum chemical resistance is required at most economical cost. CNSL is most inexpensive among other resin base mortar, but at the same time is most suitable material also.

Physical Properties - CSNL Mortar

Mix Ratio by wt. Solution to Powder
Compressive Strength kg/cm2
100 KG
Flexural Strength kg/cm2
Bond Strength kg/cm2
Water Absorption
Max. Temp
170' C
Setting Time
18-24 Hours

Method of Application mixing

CNSL is prepared by mixing of solution & powder to form a workable mortar. Mixing ratio is 1 part solution to 3 parts powder by wt. This ratio can vary depending upon ambient temperature and working conditions. Use clean, dry mixing pan. Take required quantity of solution and add powder slowly and start mixing to get uniform paste like mortar. Do not mix large quantity, and then can be used within 20-30 minutes.


Ensure bricks or tiles are clean, dry and kept at the same temperature of CNSL. Apply mixed mortar on brick/tile in Even thickness on all sides for bedding & jointing with the same materials. Apply little more in center so no air pockets are formed while its installation. For only joints filling, it is recommended to take great care that full depth is filled with the same. During & after completion of the application, the area must be kept dry and free from and other materials and traffic, which can affect setting & curing of CNSL.

chemical Resistance Properties

CNSL will provide very good protection against most acids, alkali solvents, oil, fats, salts etc. However it is not recommended for protection against HF, fluoride salts etc.

Storage & shelf Life

Always keep solution & powder in cool, dry place, away from direct sunlight and moisture. If stored in sealed container and bags, shelf life of solution will be 12 months, and shelf life of powder will be 4-5 months.


Solution: 25 kgs and 200 kgs (NET) in good quality MS drums.
Powder : 50 kgs (NET) in LDPE+HDPE bags.

We are specialized in Industrial Acid Proof lining and Materials.

The company Believes in ‘Be in Business with Ethic’ and assure ‘Quick Development, Unique Design, Faster Delivery, Ultimate Quality and also very compositive rates