EPOXY COAL TAR

PRODUCT CODE: AAPM-005

product description

Membrane Application For A.R.Brick Lining Work For Floor Application cleaning the surface by wire brush & All Surface required dustless /Moisture. Apply One coat of Anti corrosion Proof Coal Tar & spraying quartz sand over the Anti corrosion Proof coal tar.

Area of Application

Apply One coat of Anti corrosion Proof Coal Tar Primer, Over Primed Surface To Applying 2-3 mm Epoxy Screed Lining, Over Screed Surface To Apply Finish coat of Anti corrosion Proof Coal Tar.

Physical Properties

Working time 300C
20 Minutes
Mixing Viscosity at 2500
3000 to 6000 m pa
Specific gravity
1.15 + 0.05
Covering Capacity
500-6000 grm/per coat/M2
Thickness
125-150 micron / coat

Method of Application mixing

It is advisable to apply at least two coats to get an adequate film thickness.

Equipment Cleaning

Equipment & Hand should be cleaned before Anticorrosion Proof Coal tar begins to set, soap and water is to be used for cleaning the purpose.

Health & Safety

At the time of mixing or applying Anticorrosion Proof Coal tar wear protection hand gloves, Boggles and mask for protection.

Storage Life

Anti corrosion Proof Resin : 12 month at the temperature 300 C (+20 C) Anti corrosion Proof Coal tar : 12 month at the temperature 300 C (+20 C) All two components are stored in cool and dry place under the roof until ready to use it original unopened (Sealed) containers.

Packing

Anti corrosion Proof Resin: 25 OR 30 kg. Plastic Carboy OR MS Drum.
Anticorrosion Proof Coal Tar: 30 kg. Plastic Carboy OR MS Drum.

We are specialized in Industrial Acid Proof lining and Materials.

The company Believes in ‘Be in Business with Ethic’ and assure ‘Quick Development, Unique Design, Faster Delivery, Ultimate Quality and also very compositive rates