product description

This is a Three Component Epoxy Resin base Bedding & Joint Filling Mortars to Fix our Acid Proof Bricks / Tiles / Mandana Stones for all types of Industrial Plants. It exhibits excellent adhesion to RCC – Concrete & M.S. Surface And best inter-liner for Acid Resistant bricks/tile work. our Epoxy Primer & Epoxy Screeding Mortar Resistant to very wide range of chemicals.

Area of Application

Due to very low absorption and very high chemical resistant & high physical properties Epoxy Resin base Mortars can be used as Inter-Liner and best Bonding Agent between Concrete and acid resisting brick/tile lining work on floors, drains, reaction & storage vessels, sumps, effluent treatment plants of food/pharmaceuticals, Breweries, Dairies, Water treatment plants etc. Also 3mm – 5mm – 10mm thick Epoxy Resin base Screeding Mortars are Highly Recommended for Flooring work.

Physical Properties

Yellowish to Brown Shed
Mix Ratio by wt. Resin : Hardener : Powder
2 : 1 : 9
Compressive Strength kg/cm2
Flexural Strength kg/cm2
Bond Strength kg/cm2
Water Absorption
Max. Temp
90 C
Setting Time
06-10 Hours

Method of Application mixing

All mixing tools and pan must be clean, dry. Take appropriate quantity of resin and hardener and mix it truly with suitable means, until you get homogeneous mix. Then add powder slowly in it and start mixing slowly to avoid air trapping. The ratio can vary depending upon ambient temperature and working conditions.


After proper mixing, mortar should be buttered on back and sides of bricks/tiles to be laid. Apply little more mortar and after lying squeeze the excess mortar. If only joints filling are done with epoxy mortar, be sure that full depth of joints is filled with mortar. There should not any air pocket in the joints. During & after completion of the installation, area must be kept dry and free from any other materials, traffic, which can affect setting & curing of epoxy mortar.

chemical Resistance Properties

Epoxy is highly resistant to acids, alkalis, salts, solvents, greases, detergents etc. However it is not recommended against strong mineral and oxidizing acids.

Storage & shelf Life

Always keep resin, hardener and powder in cool, dry place, away from direct sunlight and moisture. If stored in sealed containers and bag shelf life of Resin, Harder& Powder will be one year.


As required by customer.

Health & Safety

It is advisable to wear protective wears at the time of use of epoxy and all other our products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.

We are specialized in Industrial Acid Proof lining and Materials.

The company Believes in ‘Be in Business with Ethic’ and assure ‘Quick Development, Unique Design, Faster Delivery, Ultimate Quality and also very compositive rates