FURAN MORTAR

PRODUCT CODE: AAPM-005

product description

Furan is a two-part chemical setting Furan base mortar used for bonding acid resistant bricks and tiles. It is impermeable in texture and resistant to a very wide range of chemicals, including strong acids alkalis, oils, solvents and unaffected by temperature upto 170 C. FURANE”C” a 100 % carbon filled mortar is available where resistant to Hydrofluoric acid, fluoride salts and strong hot alkalis are required.

Area of Application

FURAN is used for acid resistant bricks and tiles lining where maximum chemical resistance is required e.g. dyestuff, rayon, steel, thermal power stations, fertilizers, petro-chemicals, food-pharmaceuticals industries on locations like floors, drains, tanks, reaction & storage vessels, effluent treatment plants etc.

Physical Properties

Color
Black
Mix Ratio by wt. Solution to Powder
1.3
Compressive Strength kg/cm2
350 KG
Flexural Strength kg/cm2
75
Bond Strength kg/cm2
10
Water Absorption
1%
Max. Temp
170' C
Setting Time
06-10 Hours

Method of Application mixing

Furan is prepared by mixing solution & powder to form a workable mortar. The recommended ratio of mixing is 1 part solution to 3 parts powder by wt. The ratio will vary depending upon ambient temperature and working conditions. Use clean, dry mixing pan. Place appropriate quantity of solution in mix pan, and add powder slowly, mixing thoroughly until completely dispersed. Do not mix more material, then can be used within 20-30 minutes.

Application

Ensure that bricks or tiles are clean, dry and stored at ambient temperature. Butter the bricks or tiles with mixed mortar ensuring uniform coverage, with a slight more in the center so no air pockets are formed while its installation. When using as only jointing mortar, it is essential that FURANE is filled to the full depth of the joint. During and after completion of the application, the area must be kept dry and free from any other materials, which can affect setting and curing of FURANE.

chemical Resistance Properties

Furan is recommended to use against very wide range of acids, alkalis, solvents, salts, oils and fats. However FURNAE is not recommended to use against HF, fluoride salts, and strong hot alkalis. For these conditions, FURANE”C” 100 % carbon filled mortar is available. Also it is not recommended against strong oxidizing acids like chromic acid, Nitric acid and other oxidizing agents.

Storage & shelf Life

Always keep solution & powder in cool dry place in sealed container and bag, away from direct sun light, moisture etc. If stored as above, shelf life of solution: 1 year, powder: 3-4 months.

Packing

Solution: 25 Kgs and 250 kgs sound quality MS drums.,
Powder :
50 Kg in LDPE + HDPE bags.

Health & Safety

It is advisable to wear protective wears at the time of use of FURANE and all other our products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor. This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use is beyond our control.

We are specialized in Industrial Acid Proof lining and Materials.

The company Believes in ‘Be in Business with Ethic’ and assure ‘Quick Development, Unique Design, Faster Delivery, Ultimate Quality and also very compositive rates